
Polyplan PVC Membrane AG
Polyplan AG is plasticized PVC-based, full black, homogenous synthetic membrane produced in compliance with EN 13967 norms. Available in 1.2, 1.5, 1.8, 2.00, 3.00 mm thicknesses.
ADVANTAGES
- It has high elasticity ability.
- It is applied safely by using special welding machines.
- It is long lasting.
- It shows resistance to plant roots.
- It has high mechanical strength.
- Since it is applied with the free-laying method, it can be applied on the piled shoring wall.
PLACES OF USE
• Foundation and curtain insulation in buildings
• Terrace roofs closed to UV
SURFACE PREPARATION
Surface on which application shall be carried out must be cleaned of any dust, dirt, rust and grease and any loose parts scraped.
APPLICATION
It is applied by automatic air welding machine by free layout method.
While applying Polyplan AG, wear work clothes, protective gloves, goggles and mask conforming to the codes of occupational health and safety.
PACKAGING
Polyplan AG is offered to the market in rolls as 2,2 m in width and 20 m in length.
STORAGE CONDITION AND SHELFLIFE
It must be stored in sealed original packages by protecting against direct sunlight, on clean floor on pallets. It can be stored for a long time under proper storage conditions.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
Technical documents
Technıcal Data Sheets
- PDFPolyplan PVC Membrane AG 120Request document
- PDFPolyplan PVC Membrane AG 150Request document
- PDFPolyplan PVC Membrane AG 200Request document
Products in the same group

Roofing
Polyplan RU-P is a plasticized PVC-based, reinforced and UV resistant synthetic membrane. Available in 1.2, 1.5, 1.8, 2.0 mm thicknesses. More ...

Polyplan PVC Membrane RU-P
Polyplan RU-P is a plasticized PVC-based, reinforced and UV resistant synthetic membrane. Available in 1.2, 1.5, 1.8, 2.0 mm thicknesses. More ...

Polyplan PVC Membrane UG
Polyplan UG is a plasticized PVC-based, homogenous synthetic membrane with yellow signal layer. Available in 1.2, 1.5, 1.8, 2.00, 3.00 mm thicknesses. More ...

Tunnelling
Polyplan UG is a plasticized PVC-based, homogenous synthetic Tunnelling membrane with yellow signal layer. Available in 1.5, 2.00, 3.00 mm thicknesses. More ...