BTM — solutions that bring buildings to lifesolutions that bring buildings to life
TR

Planted Green Roofs

Flat Roofs

Extensive Greening

Extensive Greening

It is used as a separator layer under the ground in green roof areas - on the drainage plate with water holding reservoir, to filter the water and to prevent the soil from filling into the drainage plate. More ...

BTM Green System Filter 110 gr/m2

BTM Green System Filter 110 gr/m2

It is used as a separator layer under the ground in green roof areas - on the drainage plate with water holding reservoir, to filter the water and to prevent the soil from filling into the drainage plate. More ...

BTM Optıgreen FKD25 Drainage Board

BTM Optıgreen FKD25 Drainage Board

Rapid discharge of surplus water prevents the accumulation of water on non-pitched roofs and in large drainage lengths Light build-up with high drainage capacity More ...

BTM Green Protection and Storage Mat 500 gr/m2

BTM Green Protection and Storage Mat 500 gr/m2

Excess water accumulated in the drainage boards with water holding reservoir in the green roof areas overflows from the holes and accumulates on the geotextile felt in a lower layer, this type of covers is called a moist

BTM Green Anti Root Foil

BTM Green Anti Root Foil

If the waterproofing material applied in green roof areas is not resistant to plant roots, it is placed just above the existing waterproofing. (If there is protection concrete, it is laid on it.) They are low-density pol

BTM Botanik

BTM Botanik

BTM Botanik is a polyester felt-reinforced waterproofing membrane made of bitumen modified by SBS (styrene-butadiene-styrene), resistant to plant roots, coated with PE (polyethylene) film on the upper and lower surfaces,

BTM Green High Vapor Permeability Separator 90 gr/m2

BTM Green High Vapor Permeability Separator 90 gr/m2

It is used as a separator layer in green roof areas (resolved as an inverted roof) under the drainage plate and on the thermal insulation board XPS to ensure rapid evaporation of water and to prevent condensation. More .

BTM Polpan XPS (Thermal Insulation Boards)

BTM Polpan XPS (Thermal Insulation Boards)

Polpan N is a closed-cell extruded poystyrene hardfoam thermal insulation sheet with an armoured and smooth surface. Having thickness of 2, 3, 4, 5, 6, 7, 8,9 and 10 cm, these sheets are 60cm x 120 cm in dimensions. More

Intensive Greening

Intensive Greening

It is used as a separator layer under the ground in green roof areas - on the drainage plate with water holding reservoir, to filter the water and to prevent the soil from filling into the drainage plate. More ...

BTM Green System Filter 110 gr/m2

BTM Green System Filter 110 gr/m2

It is used as a separator layer under the ground in green roof areas - on the drainage plate with water holding reservoir, to filter the water and to prevent the soil from filling into the drainage plate. More ...

BTM Optıgreen FKD40 Drainage Boards

BTM Optıgreen FKD40 Drainage Boards

They are drainage boards with water holding reservoir where the water flowing from the soil in green roof areas is collected and stored by filtering through the system filter. h:40mm and double-stage with holes on it. Mo

BTM Green Protection and Storage Mat 500 gr/m2

BTM Green Protection and Storage Mat 500 gr/m2

Excess water accumulated in the drainage boards with water holding reservoir in the green roof areas overflows from the holes and accumulates on the geotextile felt in a lower layer, this type of covers is called a moist

BTM Green Anti Root Foil

BTM Green Anti Root Foil

If the waterproofing material applied in green roof areas is not resistant to plant roots, it is placed just above the existing waterproofing. (If there is protection concrete, it is laid on it.) They are low-density pol

BTM Botanik

BTM Botanik

BTM Botanik is a polyester felt-reinforced waterproofing membrane made of bitumen modified by SBS (styrene-butadiene-styrene), resistant to plant roots, coated with PE (polyethylene) film on the upper and lower surfaces,

BTM Green High Vapor Permeability Separator 90 gr/m2

BTM Green High Vapor Permeability Separator 90 gr/m2

It is used as a separator layer in green roof areas (resolved as an inverted roof) under the drainage plate and on the thermal insulation board XPS to ensure rapid evaporation of water and to prevent condensation. More .

BTM Polpan XPS (Thermal Insulation Boards)

BTM Polpan XPS (Thermal Insulation Boards)

Polpan N is a closed-cell extruded poystyrene hardfoam thermal insulation sheet with an armoured and smooth surface. Having thickness of 2, 3, 4, 5, 6, 7, 8,9 and 10 cm, these sheets are 60cm x 120 cm in dimensions. More

Pitched Roofs

Pitched Roofs

Pitched Roofs

They are drainage boards made of high-density expande polystyrene, used as a soil retainer in garden roof areas with a slope of up to 35 degrees. A special lightened soil mixture is placed directly into it. More ...

Optigreen Pitched Roof Board FKD 58SD

Optigreen Pitched Roof Board FKD 58SD

They are drainage boards made of high-density expande polystyrene, used as a soil retainer in garden roof areas with a slope of up to 35 degrees. A special lightened soil mixture is placed directly into it. More ...

BTM Optıgreen Structured Storage Fleece Type SSV 800

BTM Optıgreen Structured Storage Fleece Type SSV 800

It is used under the Optigreen Pitched Roof Board FKD 58SD, on roofs with a slope of 15-45 degrees. It has a channeled surface in the direction of the water flow. It acts as drainage, protection and moisture trap. It is

BTM Green Anti Root Foil

BTM Green Anti Root Foil

If the waterproofing material applied in green roof areas is not resistant to plant roots, it is placed just above the existing waterproofing. (If there is protection concrete, it is laid on it.) They are low-density pol

BTM Botanik

BTM Botanik

BTM Botanik is a polyester felt-reinforced waterproofing membrane made of bitumen modified by SBS (styrene-butadiene-styrene), resistant to plant roots, coated with PE (polyethylene) film on the upper and lower surfaces,

BTM Optıgreen Type T /N Anti-Slip System

BTM Optıgreen Type T /N Anti-Slip System

It prevents the sliding of the soil layer in garden roof areas up to 45 degrees inclination. They are made of light but extremely tough HDPE. A special lightened soil mixture is placed directly into it. More ...

BTM Optıgreen Anti-Slip System Type S (Cable)

BTM Optıgreen Anti-Slip System Type S (Cable)

It is used as a soil holder in garden roof areas with variable slope up to 45 degree slope. It consists of a steel cable placed parallel to each other to carry the entire load and light and robust plastic elements placed