Flat Roofs

Extensive Greening
It is used as a separator layer under the ground in green roof areas - on the drainage plate with water holding reservoir, to filter the water and to prevent the soil from filling into the drainage plate. More ...

BTM Green System Filter 110 gr/m2
It is used as a separator layer under the ground in green roof areas - on the drainage plate with water holding reservoir, to filter the water and to prevent the soil from filling into the drainage plate. More ...

BTM Optıgreen FKD25 Drainage Board
Rapid discharge of surplus water prevents the accumulation of water on non-pitched roofs and in large drainage lengths Light build-up with high drainage capacity More ...

BTM Green Protection and Storage Mat 500 gr/m2
Excess water accumulated in the drainage boards with water holding reservoir in the green roof areas overflows from the holes and accumulates on the geotextile felt in a lower layer, this type of covers is called a moist

BTM Green Anti Root Foil
If the waterproofing material applied in green roof areas is not resistant to plant roots, it is placed just above the existing waterproofing. (If there is protection concrete, it is laid on it.) They are low-density pol

BTM Botanik
BTM Botanik is a polyester felt-reinforced waterproofing membrane made of bitumen modified by SBS (styrene-butadiene-styrene), resistant to plant roots, coated with PE (polyethylene) film on the upper and lower surfaces,

BTM Green High Vapor Permeability Separator 90 gr/m2
It is used as a separator layer in green roof areas (resolved as an inverted roof) under the drainage plate and on the thermal insulation board XPS to ensure rapid evaporation of water and to prevent condensation. More .

BTM Polpan XPS (Thermal Insulation Boards)
Polpan N is a closed-cell extruded poystyrene hardfoam thermal insulation sheet with an armoured and smooth surface. Having thickness of 2, 3, 4, 5, 6, 7, 8,9 and 10 cm, these sheets are 60cm x 120 cm in dimensions. More

Intensive Greening
It is used as a separator layer under the ground in green roof areas - on the drainage plate with water holding reservoir, to filter the water and to prevent the soil from filling into the drainage plate. More ...

BTM Green System Filter 110 gr/m2
It is used as a separator layer under the ground in green roof areas - on the drainage plate with water holding reservoir, to filter the water and to prevent the soil from filling into the drainage plate. More ...

BTM Optıgreen FKD40 Drainage Boards
They are drainage boards with water holding reservoir where the water flowing from the soil in green roof areas is collected and stored by filtering through the system filter. h:40mm and double-stage with holes on it. Mo

BTM Green Protection and Storage Mat 500 gr/m2
Excess water accumulated in the drainage boards with water holding reservoir in the green roof areas overflows from the holes and accumulates on the geotextile felt in a lower layer, this type of covers is called a moist

BTM Green Anti Root Foil
If the waterproofing material applied in green roof areas is not resistant to plant roots, it is placed just above the existing waterproofing. (If there is protection concrete, it is laid on it.) They are low-density pol

BTM Botanik
BTM Botanik is a polyester felt-reinforced waterproofing membrane made of bitumen modified by SBS (styrene-butadiene-styrene), resistant to plant roots, coated with PE (polyethylene) film on the upper and lower surfaces,

BTM Green High Vapor Permeability Separator 90 gr/m2
It is used as a separator layer in green roof areas (resolved as an inverted roof) under the drainage plate and on the thermal insulation board XPS to ensure rapid evaporation of water and to prevent condensation. More .

BTM Polpan XPS (Thermal Insulation Boards)
Polpan N is a closed-cell extruded poystyrene hardfoam thermal insulation sheet with an armoured and smooth surface. Having thickness of 2, 3, 4, 5, 6, 7, 8,9 and 10 cm, these sheets are 60cm x 120 cm in dimensions. More