
Renova DUE
PLACES OF USE
- Terraces
- Roofs
- Foundations
SURFACE PREPARATION
All surfaces must be smooth, dry, clean and free of oil, grease, rust and other foreign materials. Deep cracks, fissures and very rough surfaces should be filled with bitumen repair mastic.
APPLICATION
Bitumen primer application is recomended before usage.Before using in low temperature conditions (below 10 °C), adhesion will be improved by gently warming tape and surface with warm air blower during application.
PACKAGING
Renova UNO, is launched into the market in rolls 1m wide and 10m long.
STORAGE CONDITION AND SHELFLIFE
The membrane rolls should be stored vertically under a roof, protected from direct sunlight. If the rolls have to be stored outdoors for a long period of time, they must be covered with a protective layer in order to protect them from the sunlight. The membrane rolls or pallets should not be stacked on each other.
Rolls should be stored 5-25°C in temperature, in its sealed and undamaged package, in dry, ventilated,closed area, and max 1 year since production date. Rolls must be protected from water, frost, direct sunlight and heavy weather conditions.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
Technical documents
Technıcal Data Sheets
- PDFRenova DuePDF ↓
Qualıty Certıfıcates
- PDFCE Certificate 13969Request document
Products in the same group

Renova UNO
Renova UNO was developed for renovation projects, its one side is self-adhesive, and this product is a special polymer bituminous, polyester carrier, 3 mm thick. Especially in the roof insulation of historic structures w

BTM Elastoself MD
It is a self-adhesive, cold-applied waterproofing membrane with a polyester felt carrier, made of bitumen modified with SBS (styrene-butadiene-styrene), 1.5 mm thick, covered with silicone foil on the lower surface, show