It is used as a separator layer in green roof areas (resolved as an inverted roof) under the drainage plate and on the thermal insulation board XPS to ensure rapid evaporation of water and to prevent condensation.
The XPS surface must be laid, dry and clean.
It is laid by overlapping each other with a minimum of 10-15 cm from the transverse and longitudinal joints.
It is in the form of rolls of 420 m2. Width:2,10m Length:200m
It should be stored indoors out of sunlight.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir-TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co