
BTMSEAL Purea P
BTMSEAL PUrea P is a two-component, solvent-free, hot cured, highly-mechanic-and-chemical-resistant, rapidly cured, pure polyurea based waterproofing lining. After the application, it forms a highly abrasion-and-compression-resistant and solid structure with the fracture-bridging feature.
PLACES OF USE
Mineral and metal based, waterproofing required;
- roof, terrace and balconies,
- water containers and tanks,
- swimming pools,
- treatment facilities,
- car parks,
- green roof applications,
- channels, tunnels.
SURFACE PREPARATION
The surface must be free of all kinds of dust, weak parts, oil, etc. A successful application can be achieved with the right surface preparation and the use of the right material.
• The application surface must be dry.
• The application surface must have a minimum C25 concrete class.
o Tensile Strength: 1.5 N/mm²
o Compressive Strength: It should be 25 N/mm².
• Damages and irregularities on the application surface should be repaired with suitable materials.
• In order to achieve better adherence, it is recommended to roughen the application surface with tools such as milling cutters and blast trucks.
• The surface should be thoroughly cleaned of dust and waste with the help of an electric vacuum cleaner.
• BTMSeal AA 0106 Epoxy Based Solvent Free Transparent Impregnation Primer (surface moisture <4%), BTMseal E2K NB Transparent Epoxy Primer (surface moisture <8%) or one component PU primer PU1K Primer (surface moisture <4%) should be used as a primer.
• Btmseal PUrea P should be applied with a special heated airless spray designed for Purea.
• After applying Btmseal PUrea P, missing, faulty or thinly applied areas should be corrected by reapplication within a maximum of 4 hours after the application.
• After the application, the material should be exposed to water, dew, dust, etc. for 24 hours. effects must be protected.
• If the material will not be covered with another material, the material should be covered with protective coating material which have to PU based.
APPLICATION
Application tools:
Heated Airless Spray
Mixture Ratio (Volume %) Component A :100 Component B:100
Mixture Ratio (Weight %) Component A :100 Component B:88,89
Procedure Heat (ºC) Component A: 70-80 Component B:70-80
Procedure Pressure (Bar) Component A :150-200 Component B:150-200
PACKAGING
Component A: 220 Kg. Drum
Component B: 200 Kg. Drum
STORAGE CONDITION AND SHELFLIFE
Keep in cool and dry places in its original package for 9 months.
SAFETY INFORMATION COMPONENT A
H315: May cause skin irritation. H332: Hazardous if inhaled. H335: May cause respiratory tract irritation. P261: Do not inhale the vapour. P264: Was your hands with plenty of water after handling. P271: Only use in open spaces or well-vatilated areas. P280: Use protective gloves/Protective clothing/Protective eyewear/Protective mask P321: Requires special attention.
P302+P352: IN CASE OF CONTACT WITH SKIN: Rinse with soap and plenty of water.
P304+P340: IF INHALED: If labored breathing occurs, take the person out for fresh air and keep him in a comfortable position that he can easily breath.
P:332+P313: IN CASE OF SKIN IRRITATION: Get Medical Help
SAFETY INFORMATION COMPONENT B
P261: Do not inhale the vapour. P264: Was your hands with plenty of water after handling. P271: Only use in open spaces or well-vatilated areas. P280: Use protective gloves/Protective clothing/Protective eyewear/Protective mask. P321: Requires special attention.
P302+P352: IN CASE OF CONTACT WITH SKIN: Rinse with soap and plenty of water.
P304+P340: IF INHALED: If labored breathing occurs, take the person out for fresh air and keep him in a comfortable position that he can easily breath.
P:332+P313: IN CASE OF SKIN IRRITATION: Get Medical Help
P403+233: Keep in a well-ventilated area. Close the container firmly.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
Technical documents
Technıcal Data Sheets
- PDFBTMSEAL Purea PRequest document
Declaratıon of Performance
- PDFDOP2: EN 1504-2 PureaPDF ↓
Products in the same group

BTMSEAL Alfahibrit
BTMSEAL AlphaHybrid is a hybrid polymer based waterproofing material, which can be applied at temperatures of -5°C and above. It can be applied to wet surfaces and does not require a primer. It has a 2 mm crack bridging

BTMSEAL Alpha Hybrid Transparent
BTMSEAL ALPHA HYBRID TRANSPARENT is which can be applied - 5 ° C and at temperatures above, can be applied to wet surfaces, not require primer, 2mm. crack featured bridging, solventless, cyanate-free, fast curing, easy t

BTMSEAL Elasto Dryroof
BTMSEAL ELASTO DRYROOF is the specially formulated elastomeric based waterproofing material to be applied to various surfaces. By means of its special formulation, it provides excellent weather resistance and waterproofi

BTMSEAL Purea H
BTMSEAL PUrea H is a two-component, solvent-free, hot cured, highly mechanical and chemical resistant, rapidly cured, hybrid polyurea-based waterproofing coating. Following the application, it creates a highly abrasion a