
Polyplan PVC Membrane WD
Polyplan WD is a plasticized PVC-based, single color homogeneous synthetic membrane, with a certificate of conformity to contact with drinking water. Available in 1.5, 2.00 mm thicknesses.
ADVANTAGES
•It does not change the color and quality of water
•Safely applied by using special welding machines
•Showing high puncture strength
•Resistant to chemicals in potable and city water
•Providing welding control test opportunity
PLACES OF USE
•Potable water reservoirs
•Fire protection and city water reservoirs
SURFACE PREPARATION
Surface on which application shall be carried out must be cleaned of any dust, dirt, rust and grease and any loose parts scraped.
APPLICATION
Applied by means of automatic air welding machines, Polyplan WD membranes can be checked with welding test.
While applying PolyPlan WD, work clothes, protective gloves, goggles and mask must be worn, which comply with the rules of Work Safety and Labour Health.
PACKAGING
PolyPlan WD is launched into the market in rolls 1,62 m wide and 20 m long.
STORAGE CONDITION AND SHELFLIFE
It must be stored in sealed original packages on pallets on a clean floor away from direct sunlight. It may be stored for a long time under proper storage conditions.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
Technical documents
Technıcal Data Sheets
- PDFPolyplan PVC Membrane WD 150Request document
Products in the same group

Roofing
Polyplan RU-P is a plasticized PVC-based, reinforced and UV resistant synthetic membrane. Available in 1.2, 1.5, 1.8, 2.0 mm thicknesses. More ...

Polyplan PVC Membrane RU-P
Polyplan RU-P is a plasticized PVC-based, reinforced and UV resistant synthetic membrane. Available in 1.2, 1.5, 1.8, 2.0 mm thicknesses. More ...

Basement and Retaining Wall
Polyplan AG is plasticized PVC-based, full black, homogenous synthetic membrane produced in compliance with EN 13967 norms. Available in 1.2, 1.5, 1.8, 2.00, 3.00 mm thicknesses. More ...

Polyplan PVC Membrane AG
Polyplan AG is plasticized PVC-based, full black, homogenous synthetic membrane produced in compliance with EN 13967 norms. Available in 1.2, 1.5, 1.8, 2.00, 3.00 mm thicknesses. More ...