It has adhesion on a variety of surfaces such as:
Surface to which it shall be applied must be clean and dry. All loose parts, form-detaching greases, residues, paint, rust and other poorly adhered materials must be cleaned off the surface. Metallic, plastic, etc. surfaces must be cleaned by using a proper solvent. BITUSOL or BITUMER undercoat must be applied to such rough surfaces as concrete, plaster, chipboard, etc. and left until the surface dries out.
It must be applied by heating to increase adhesion performance at low temperatures.
Bitüself STAR is packed in rolls of 10-15-20-30-60 cm wide and 10 m long.
One year from the production date in case it is stored in its sealed and undamaged package in dry ambient conditions at a temperature from +5°C to +25°C away from direct sunlight.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co