PRODUCTS
BTMSEAL Alfahibrit
BTMSEAL AlphaHybrid is a hybrid polymer based waterproofing material, which can be applied at temperatures of -5°C and above. It can be applied to wet surfaces and does not require a primer. It has a 2 mm crack bridging capability. It is solvent-free, heavy metal and cyanate-free, fast curing and easy to apply. After application it creates a seamless, UV durable structure with a crack-bridging feature. Thanks to its elastomeric property, its performance remains the same even at low temperatures.
ADVANTAGES
• No need to prime
• Fast and full cure
• The new generation curing agent
• Easy application because of low viscosity
• Unplasticised formulation
• Breathable
• High chemical resistant
• -5 º C to 35 º C applied.
• Applied to damp surfaces
• Have not fully cured (minimum 4 days) applied on fresh concrete
• Terraces and balconies
• In the basement of the inner and outer surfaces
• Repair of surface cracks
• The joints of interior and exterior surfaces
• The interior surfaces of the domes and facades
• In waterproofing on the roof
• Under ceramic application
• As a moisture barrier in flooring applications
PLACES OF USE
• Terraces and balconies
• In the basement of the inner and outer surfaces
• Repair of surface cracks
• The joints of interior and exterior surfaces
• The interior surfaces of the domes and facades
• In waterproofing on the roof
• Under ceramic application
• As a moisture barrier in flooring applications
SURFACE PREPARATION
Application surface, dust, loose parts, such as anti-stick material be free of oil is required. Successful application, the correct surface preparation and can be achieved by using the right materials. Application surface may be damp or wet ground. But should not puddles.
• The surfaces of dust and waste with the help of an electric vacuum cleaner should be cleaned thoroughly.
• BTMSEAL ALFAHYBRID brush, roller or airless spray should be applied.
Application surfaces:
• Concrete
• Cured, uncured fresh(green) concrete
• Glass
• Glossy, matte ceramic surfaces
• Steel, stainless steel
• Aluminum
• Cupper
• Zinc
• Wood
• Bitumen and asphalt-based surfaces.
APPLICATION
Application Tools:
Brush, roller or airless sprey
After the application all tools must be clean
CONSUMPTION
1,8-2,2 kg/m2 (according to the surface condition)
PACKAGING
4.5 kg - 20 kg ( 15 kg transparent)
Colour: White,RAL 7040-7046 and transparent
STORAGE CONDITION AND SHELFLIFE
Store in dry conditions in original packaging at temperatures between +5°C and +30°C. Protect from direct sunlight and frost. Unopened packaging at least 12 month.
WARNINGS
• Application surface imperfections and shiny / non-absorbent portions with appropriate tools (floor mills) should be roughened.
• Opened packages should be completely finished.
• After curing, BTMSEAL ALFAHİBRİT is completely healthy.
Application, using protective gloves, should be done in well-ventilated places.
Materials in contact with the skin or eyes immediately with plenty of water and / or should be washed with soap.
For more information please apply to our technical department.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
