PRODUCTS

Bituproof Y Plus
BTM BituProof Y Plus is a superior membrane being SBS-additive, elastomeric modified bituminous, having high strength, double layered special polyester reinforcement, laps of which are torched.
 
PLACES OF USE

The first layer elastomeric waterproofing membrane used in the foundation base of foundation tanking system.


SURFACE PREPARATION

The surface of the rubble concrete poured in sufficient thickness and strength must be surfaced. There should be no loose aggregate and sharp protrusions on the surface. The floor should be cleaned by sweeping before application.

 


APPLICATION

Long laps of BTM Bituproof Y should be torched as 10 cm and short laps will be 15 cm.


PACKAGING

BTM BituProof Y Plus; BTM BituProof Y is available in 1 m in width and 8 m in length in roll.


STORAGE CONDITION AND SHELFLIFE

The membrane rolls should be stored vertically under a roof, protected from direct sunlight. If the rolls have to be stored outdoors for a long period of time, they must be covered with a protective layer in order to protect them from the sunlight. The membrane rolls or pallets should not be stacked on each other.

Shelf-life is one year  from the production date in case it is stored in its sealed and undamaged package in dry ambient conditions at a temperature from +5°C to +25°C away from direct sunlight.


 adres_2BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10  info@btm.co • www.btm.co

 


TECHNICAL DATA SHEETS
DECLARATION OF PERFORMANCE
MANAGEMENT SYSTEM DOCUMENTS
ISO 9001-2015 Quality Management System Certificate
PRODUCT CATALOGUES
qiEdu