Plastobit is a fiberglass or polyester felt reinforced waterproofing membrane made of bitumen modified with APP (atactic polypropylene), the lower surface is coated with PE (polyethylene) film and the upper surface is coated with PE (polyethylene) film or colored granules and applied with an oxyacetylene burner. We, BTM, may produce 11 types of the Plastobit membrane with different properties.

BTM Polibit is a fiberglass or polyester felt reinforced waterproofing membrane made of bitumen modified with APP (atactic polypropylene), the lower surface is coated with PE (polyethylene) film and the upper surface is coated with PE (polyethylene) film or colored granules and applied with an oxyacetylene burner. We, BTM, may produce 10 types of the Plastobit membrane with different properties.

BTM Levobit is a fiberglass or polyester felt reinforced waterproofing membrane made of bitumen modified with APP (atactic polypropylene), the lower surface is coated with PE (polyethylene) film and the upper surface is coated with PE (polyethylene) film or colored granules and applied with an oxyacetylene burner.

BTM Botanik is a polyester felt-reinforced waterproofing membrane made of bitumen modified by SBS (styrene-butadiene-styrene), resistant to plant roots, coated with PE (polyethylene) film on the upper and lower surfaces, having a high elasticity, applied with an oxyacetylene burner or hot asphalt. BTM produces four different membranes under the designation of Botany.

POSEIDON PO 5000 is a bitumen-based waterproofing membrane enriched with elastomeric and TPU additives, with a special carrier with high stability and increased mechanical resistance, PE (polyethylene film) on the lower surface, and colored mineral or fine sand on the upper surface.

Poliroof SA MB, offers rich detail solutions for roofs covered with shingles.

Brush Applied, Water Based, Flexible, Two Component Waterproofing Material enhanced with Polymers and Reinforcing Fibres Flexible waterproofing material free of solvents and reinforced with fiber as well as polymer, rubber and is applied by means of a brush.

Dual component, flexible, water based, fibre reinforced rubber-polymer modified bitumen waterproofing BT2K 750 waterproofing has been designed for protection of structures against water with carefully chosen rubber-polymer modified bitumen, dual component, cold applied, fibre reinforced and flexible waterproofing material.

ELASTOPAST is a cold applied elastomeric bitumen mastic, joint sealant and adhesive for waterproofing, adhering, sealing leaks and making repairs.

BTR-100 is a water-based bitumen emulsion used as primer in waterproofing. The application surface should be free of dust, dirt, rust and oil, and loose parts scraped.

Bitumer BTR200 is cold applied, non-flammable,single component, corrosion-resistant, water based bituminous waterproofing material

BTMSEAL AlphaHybrid is a hybrid polymer based waterproofing material, which can be applied at temperatures of -5°C and above. It can be applied to wet surfaces and does not require a primer. It has a 2 mm crack bridging capability. It is solvent-free, heavy metal and cyanate-free, fast curing and easy to apply. After application it creates a seamless, UV durable structure with a crack-bridging feature. Thanks to its elastomeric property, its performance remains the same even at low temperatures.

BTMSEAL ALPHA HYBRID TRANSPARENT is which can be applied - 5 ° C and at temperatures above, can be applied to wet surfaces, not require primer, 2mm. crack featured bridging, solventless, cyanate-free, fast curing, easy to apply, has 100% solid (solventless), hybrid polymer based transparent waterproofing material. Excised after application, U.V. durable, rugged and crack-bridging feature creates a structure. Elastomeric property by reason of the performance remains the same even at low temperatures.

BTMSEAL ELASTO DRYROOF is the specially formulated elastomeric based waterproofing material to be applied to various surfaces. By means of its special formulation, it provides excellent weather resistance and waterproofing characteristics for many substrates. White color is UV-resistant. It is resistant to chalking and dirt and algae, fungus and mildew formation and bridges hairline cracking and also it is resistant to yellowing. It maintains its flexibility at even very high and low temperatures

BTMSEAL PUrea H is a two-component, solvent-free, hot cured, highly mechanical and chemical resistant, rapidly cured, hybrid polyurea-based waterproofing coating. Following the application, it creates a highly abrasion and compression resistant and solid structure having crack bridging feature.

BTMSEAL PUrea P is a two-component, solvent-free, hot cured, highly-mechanic-and-chemical-resistant, rapidly cured, pure polyurea based   waterproofing lining. After the application, it forms a highly abrasion-and-compression-resistant and solid structure with the fracture-bridging feature.

BTMSEAL E2K F is solvent-free, two-component, filled, epoxy-based, which is made of resin and hardeners, lining material. The product has low viscosity, easy to apply, and it penetrates perfectly to the surfaces. It can be used indoor and outdoor areas, since it does not contain any solvent. After it is cured, it forms a waterproof, fraction-resistant and impermeable film. This film is impermeable and resistant to acid, base, diluted saline solutions, grease oils and petroleum products. Since A and B components are packed in measured amounts, they should be used by getting mixed together in the field of use. 

BTMSEAL E2K NB is solvent-free, two-component, transparent, epoxy-based, which is made of resin and hardeners, lining material; especially used for Polyurethane/Polyuria based BTMSEAL products. The product has low viscosity, easy to apply, and it penetrates perfectly to the surfaces. It can be used indoor and outdoor areas, since it does not contain any solvent. After it is cured, it forms a waterproof, fraction-resistant and impermeable film. This film is impermeable and resistant to acid, base, diluted saline solutions, grease oils and petroleum products. Since A and B components are packed in measured amounts, they should be used by getting mixed together in the field of use. 

BTMSEAL INJECT 1K PU is one-component, polyurethane-based, semi-flexible, hydrophobic foam injection material developed to block the water leaking from fractures and pores of concrete elements. 

It efficiently blocks water leakages, deeply and rapidly penetrating into the gaps on construction elements; since it has low viscosity. 

BTMSEAL PU 1000 is, elastomeric, polyurethane based, flexible waterproofing coating material for vertical and horizontal surfaces. After application, seamless, durable and creates a structure capable of bridging cracks. Elastomeric property by reason of the performance remains the same even at low temperatures.

BTMSEAL PU 1260 is U.V.resistant, elastomeric, polyurethane based, flexible waterproofing coating material for vertical and horizontal surfaces. After application, seamless, durable and creates a structure capable of bridging cracks. Elastomeric property by reason of the performance remains the same even at low temperatures.

BTMSEAL PU 3500 is U.V.resistant, elastomeric, transparent, polyurethane based, flexible waterproofing coating material for vertical and horizontal surfaces. After application, seamless, durable and creates a structure capable of bridging cracks. Elastomeric property by reason of the performance remains the same even at low temperatures.

A one component clear polyurethane primer which has been designed as a high performance bonding agent for Polyurethane sealants and coatings.

BTMSEAL AA 0106 is solvent free low viscosity two component, transparent impregnation primer based on epoxy base (resin) and reactor (hardener).  It is used specially as a primer to bind BTMSEAL products such as polyurathane and polyurea based rigidly to the substrate.  Pack A & Pack B are pre-measured quantity of Resin and Hardener and need only mixing at site.

It is a fabric-like surface created by combining fibers that are much thinner than a millimeter by needling and heat treatment method.

BTM Drainage is a drainage and protective material with a bubble profile produced from high-density polyethylene.

Expanding Waterstop For Concrete Joints

A sodium bentonite and butyl rubber based waterstop immediately swells upon contact with water. BTM Swell Tape fills the pores and cracks in the concrete and leaves a watertight joint.